The system will operate in singl e channel mode if the DIMM so ckets are populated in one channel only.

The system will automatically operate in single channel mode, dual channel mode, or flex mode, depending on how the DIMMs are installed.

Sockets DIMM3 and DIMM4 operate in memory channel A. Sockets DIMM1 and DIMM2 operate in memory channel B. The sockets are labeled DIMM1, DIMM2, DIMM3, and DIMM4. There are four DIMM sockets on the system board, with two sockets per channel. NOTE: The system will not operate properly if you install unsupported DIMMs.

DIMMs constructed with x8 and x16 DDR device s DIMMs constructed with x4 SDRAM are not supported.

512-Mbit, 1-Gbit, and 2-Gbit non-ECC memory technologies.

contain the mandatory JEDEC SPD information.

support CAS latency 7 DDR3 1066 MHz (7-7-7 timing) and CAS latency 9 DDR3 1333 MHz (9-9-9 timing).

The processor is not compatible wi th DDR3U memory and if you plug DDR3U memory into the system board, it can cause the physical damage to the DIMM or invoke system malfunction.įor proper system operation, the DDR3-SDRAM DIMMs must be: CAUTION: This product DOES NOT support DDR3 Ul tra Low Voltage (DDR3U) memory.

Elite dangerous graphics mod